|   Home   |   About Us   |   Contact Us   |

a a
a

|   STM-1 (upto 63 E1)   |

|   PRODUCTS   |

Description

The VCL100MC-1 STM-1 (upto 63 E1) with E3, DS3, 10/100BaseT Ethernet interfaces is a compact, modular, and cost effective STM-1 SDH multiplexer equipment designed to manage bandwidth and provide E1 or fractional E1, voice and data access service over STM Networks.

The system has two STM-1 optical / electrical interfaces in the aggregate side and allows for upto 3 tributary add-on cards. The following tributaries are available as add-on cards for the chassis:

  • E1
  • E3/DS3 tributaries (software configurable as E3 or DS3)
  • 10/100Base-T Ethernet (IEEE 802.3)
  • STM-1o
  • STM-1e/140Mbps tributary interfaces (software configurable)

Additionally it provides a single 10/100Base-T Ethernet port, which can be mapped to one VC-12 bandwidth towards the aggregate side. This feature does not use any tributary slot and hence can supplement E1/DS1/E3/DS3 customers requiring a single Ethernet interface. This Ethernet interface on the base card is optional.

VCL100MC-1 Network Element Software (NES)

The VCL100MC-1 node is managed through the embedded (Network Element Software). The main capabilities are listed below:

  • Switch over to redundant power supply in the event of any hardware fault
  • Auto Recovery after Input Power Failure in a redundant system
  • Node-wise Operations & Maintenance
  • User programmable severity levels for Alarms
  • Node-wise Alarming & Remote Login
  • Performance monitoring as per the standard specifications (G.826)
  • In-service monitoring of E1 tributaries

A standard Network Element Software (NES) starter package enables all of the above.

User can access and control all of the above-mentioned features using a standard Hyper Text Transfer Protocol (HTTP) based web browser. The Ethernet interface on the base chassis is to be used as the physical data connection for this purpose. The NES also allows users to control remote nodes using the web browser interface. For this purpose Comarra uses SDH DCC bytes for carrying the management information to the remote node.

To provide network wide management and control of VCL100MC-1 nodes through industry standard Network Management Systems, users can enable the Simple Network Management Protocol interface software module (NES-SNMP). This module provides open interfaces which can be also be used by Network Management System (NMS) which is described later in this document.

The (NES) point-and-click provisioning tool (PNCP) is a set of software modules that enables customers to provision end-end circuits is a network that comprises all Comarra family of SDH products. Users can enable this feature using the node-resident software module NES-NODE-PNCP, and the server-resident software module NES-HOST-PNCP.

Network Management System

The STM-1 / STM-4 provides support for centralized network management through Network Management System (NMS).

Operations Interfaces

  • 10/100 Mbps half-duplex LAN interface for NMS data connection to VCL100MC-1 node (RJ45 connector).
  • RS232C Craft interface for local Command Line Interface data connection
  • 2 wire analog telephone interface for Engineering Order Wire (E1 or E2 bytes access) with omnibus calling.

Others Links:

  Multiplexers
  STM SDH Multiplexers
  E1 VoIP-GSM Gateways
  VoIP SS7 and C7 Solution
  Echo Cancellers and VQE Solutions
  GSM Gateways / GSM Channel Banks
  E1 and T1 over Ethernet (TDM over IP)
  Digital Access Cross Connect Switch (DACS)
  E1, T1, E3, DS3, Ethernet Converter (IP over TDM)

Technical specifications are subject to change without notice.
All brand names and trademarks are the property of their respective owners.